1 - Superior Base 1.3
2 - Superior Clear 1.4
3 - 1.8 SGW Imported Primer Gun 1.8
Highly Recommended - Compares with guns costing $300.00
Fast working speed & wide fan pattern
Good for clears and single stage paints, Woodworking thinner
Anodized gun body
0.6 L Aluminum
Stainless steel needle & fluid tip makes it suitable
for water base
An environmentally favorable HVLP system with low air
consumption and high transfer efficiency exceeds 65%
Nozzle size: 1.3 mm
Average air consumption: 10 CFM @ 29PSI
Air Inlet NPT: 1/4" (Male)
Weight: 1.62 lbs.
Cup capacity: 0.6 liter
Spray Gun with Patented cap nozzle design and use of lower volume
of air finely atomizes paint creating a smooth finish with minimum
Stainless steel needle and fluid tip makes it suitable for
water base products
Decreased overspray creates cost savings over conventional
Nozzle Sizes: 1.4mm
Operation Pressure: 25psi
Gun Weight: 1.021lbs
Avg. Air Consumpt.: 9.6CFM (7.8@40) Can be used with 6.0 CFM@40 for wood or auto spot or panel work
Air Inlet Thread NPT: 1/4"
Recommended Compressor: 3hp
Max. Pattern at 8" Distance: 8.5" - 9"
Air Hose I.D. Size: 1/4"
Comes with .6 Liter Plastic Cup
10PSI operating pressure
- All-Purpose Spray Paint Gun
- Produces High Quality Paint Atomization
- High Volume, Low Pressure Minimizes Overspray
- Fully Adjustable Wide Fan Pattern Control
- 1-Liter Aluminum Cup
Operating Pressure: 29-50 psi
Average Air Consumption: 6-9 CFM
Net Weight with Cup: 1.8 lbs.