SGW Imported HVLP 1.8 Priming Gun
Fast working speed & wide fan pattern
Good for primer filers and thicker priming materials
1 L Aluminum Cup can be used on both guns
An environmentally favorable HVLP system with low air
consumption and high transfer efficiency exceeds 65%
To avoid contamination automotive professionals recommend
keeping your priming gun separate from your finishing gun.
Nozzle size: 1.8 mm
Air Inlet NPT: 1/4" (Male)
Cup capacity: 1 liter Aluminum can be used on both guns
LVLP Spray Gun with Patented cap nozzle design and use of
lower volume of air finely atomizes paint creating a smooth
finish with minimum overspray
Stainless steel needle and fluid tip makes it suitable
for water base products
Decreased overspray creates cost savings over conventional
Nozzle Sizes: 1.4mm
Operation Pressure: 25psi
Gun Weight: 1.021lbs
Avg. Air Consumpt.: 9.6CFM (7.8@40)
Air Inlet Thread NPT: 1/4"
Recommended Compressor: 3hp
Max. Pattern at 8" Distance: 8.5" - 9"
Air Hose I.D. Size: 1/4"
Comes with .6 Liter Plastic Cup
10PSI operating pressure