fuji hvlp
spraygunworld
wood
Ask@SprayGunWorld.com
line

logo
model 7
New model includes pattern adjustment knob at front of gun head.
Swivel Side Cup - Perfect design for woodworking

Cup swivels so you can spray in any direction and the cup will stay in the correct position.

Please note* Fuji spray guns can only be used with an HVLP Turbine (any make). They cannot be used with standard compressors. Unless you purchase a conversion regulator.

 

#3 Air Cap Water-based Lacquers, Nitrocellulose Lacquer, Sealers, Cellulose, Acrylics, Synthetics, Polyurethane, Stains. #4 Pigmented Lacquer and Thinned Latex where finer finish is required. Also ideal for heavy Varnishes, Primers, Oil-Based Paints.

NEW! HVLP XPC & G-XPC GOLD
Upgrade
SGW: This is one fantastic gun. Modern Gravity Design with a new Swivel action. Cup can be moved in a flash to accommodate different spraying angles. Even up and down. A fantastic sprayer highly recommended.

Features

We recommend #3 tip set for fine finishing.

Upgrade your current turbine gun now and receive a Free Gift from SGW with your order
valued at $54.95 - email for specifics ask@spraygunworld.com

GRAVITY G-XPC GOLD
Now with fan control and improved atomization
Your Cost: $369.00 ON SPECIAL! FREE SHIPPING CONTINENTAL US $310.00

Nozzle Size #4 1.4mm & Free Gift

model 7

 

 

Bottom Feed XPC GOLD
Now with fan control and improved atomization
Your Cost: $369.00 ON SPECIAL! FREE SHIPPING CONTINENTAL US $310.00

Nozzle Size #4 1.4mm & Free Gift

 

 

#3 Air Cap Water-based Lacquers, Nitrocellulose Lacquer, Sealers, Cellulose, Acrylics, Synthetics, Polyurethane, Stains. #4 Pigmented Lacquer and Thinned Latex where finer finish is required. Also ideal for heavy Varnishes, Primers, Oil-Based Paints.

 

    • Pressure assisted Gravity Spray Cup side mounted for a smaller footprint and easier maneuverability.
    • Swivel action in the cup allows cup to rate and helps the gun spray at any angle. even up and down.
    • Gun can handle fine finish lacquers and urethanes with #3 tip set as well as heavier paints with the #4 tip set.
    • Easy to use gravity feed design. Screw top for easy filling.
    • Having a smaller capacity cup the GT-X2 is much lighter in weight than the XT-2.
    • Spray gun may be converted to upper hose connect kit.
    • The GT-X2 can be easily changed to pure gravity spray which will give a finer softer spray with lighter finishes.
    • The GT-X2 can be used with a pressure pot.

     

    Fuji Spray® developed this new spraygun to meet the rising demand for a gravity gun that can be used with any HVLP turbine. The new Gravity Spray gun has all the features of the standard Fuji XT gun. The GT-X2 comes with the #4 Aircap installed. This is the medium output size, best for fine finishing with lacquers, enamels, polyurethane, latex, water based coatings and more. The Stainless Steel Cup is 400cc (.85 Pint).

    **NEW** The cup now uses pressure feed (plus gravity) for faster coverage. It now has the same abilities as our XT-2 spray gun. This spray gun is already proving to be very popular with Bathtub and Auto Refinishers but it is also perfect for cabinet spraying too. Also, please see the 7015 Upper Hose Connector Kit for those who prefer the hose attached to the rear of the barrel.

    Cleaning is a snap! The gun does not have to be connected to the hose or turbine. Here’s how…

    • Partially fill the cup with solvent
    • Wind out the fluid knob and pull the trigger
    • Direct the fluid stream into a container

    An excellent choice for professional use or even for the serious hobbyist. Sorry... Fuji only manufactures this spray gun with the 400cc size cup

  • line
  • NEW XPC or G-XPC (new sets do not fit older XT Series Gun)
    Xtra - Tip set only with purchase of Spray Gun

    tip set 4
    Your Cost: $69.95 ON SPECIAL! FREE SHIPPING CONTINENTAL US $54.95

    Nozzle Size

     




    line


    air inlet kitconnector kit

  • **NEW** Gravity w/Upper Air Connector #9300-G

    Your Cost:ON SPECIAL! FREE SHIPPING CONTINENTAL US $34.95

     

  • Exactly the same spray gun as our 9100-G GTX-2 but with the ability to attach the hose to the Upper Rear Barrel. This allows you to drape the hose over your shoulder thereby keeping it out of the way. We recommend this model, (or the XT-2 with the same capability) to such trades as Bathtub Refinisher who need to keep the cup and hose away from the walls of the tub. Please note* this is a specialized item and may not be available at all dealers.

    Important: unlike with the air supply attached to the standard connector at the base of the handle, the air passes straight through the upper barrel and bypasses the trigger valve. So the gun functions exactly as a bleeder gun with air passing through the gun all the time (whether or not the trigger is pulled back). For HVLP Turbine use only.

 

  line
COMPLETE OUTFITS

mity GT-XT2

 

 

 

 

 

space

 


We also have a wide selection of quality tools for the Professional and Serious Hobbyist at www.SprayGunWorld.com.



 
SprayGunWorld